- NOTE: This smart relay need to work with ZigBee 3.0 Hub, the hub is not include, You need to have a hub or purchase one.
- Easy to Install: the smart relay switch module has a mini body(72*45*29mm), you can put it in whatever type of junction box you use.
- Punxasl Zigbee 3.0 smart relay switch can be connected to Home Assistant or Zigbee2MQTT to achieve localization control.
- Energy Saving: Compared to Wi-Fi relays and Mech smart switch, Zigbee 3.0 smart breaker module features ultra lower idle power consumption, it can reduce power consumption, thereby reducing energy waste and contributing to environmental friendliness.
- Wide Compatible: Thanks to the Zigbee3.0 protocol, the DIY smart garage door opener can work with different type of external switches to control your devices, that ensure a powerful compatibility for more hubs supported. You can quickly add it to SONOFF ZBBridge, getting them paired via a single tap on the app.
- Voice Control: Punxasl smart switch work with your smart home device for complete voice control, for example the Alexa and Google assistant, after do it you can control your home appliances by your vioce.
- [Dry Contact Work Mode] The Punxasl 12 V Relay Module has two working mode: (1)Inching mode: Turn on one channel, the channel will be automatically closed after 0.5 seconds. The inching time can’t be changed. (2)Self-locking: Each channel could turn on or turn off seperately .You can turn on or turn off all channel at the same time. and the relay will stay the open or close status until you press the manual button.
Product Description
NOTE
1.The Zigbee3.0 switch can only use in Zigbee signal, can NOT use in WiFi.It require ewelink zigbee hub,Sonoff Zigbee Bridge,Tuya zigbee hub.
2.The relays are dry contact output, the power supply input (DC) just for the PCBA.
Works with eWeLink APP
It can NOT use in eWelink APP without ewelink hub or Sonoff zigbee bridge.
Works with Tuya APP
It can NOT use in tuya APP without Tuya zigbee hub.
Support RF433Mmhz Control
1.Press the RF433 pairing button in the device for 3 seconds ,and wait until the blue led indicator turn on.
2.Press any button of remote controller, and then you can pair the device with remote controller successfully.
How to clear rhe pairing of the device with RF433 Remote Controller
Press the RF433 pairing button for 8 seconds, and wait until the blue led indicator turn off.It will clear the pairng.
Specification
Input:USB 5V port or DC/AC 7V-32V Screw Terminal Port
Output:NC NO COM
Passive Output(Dry contact)
Max.Current:2200W/10A/gang
Wireless Standard: Zigbee
Working temperature:-20℃~70℃
Size: 69*41*20mm